Cisco Catalyst 3560-24PS EMI - switch

Main Specifications
Product Description	Cisco Catalyst 3560-24PS EMI - switch - 24 ports
Product Category	Switch
Device Type	Switch
Form Factor	Rack-mountable - 1U
Dimensions	17.5 in x 11.8 in x 1.7 in
Weight	11.2 lbs
RAM	128 MB
Flash Memory	16 MB
Data Link Protocol	Ethernet, Fast Ethernet
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c
Communication Mode	Half-duplex, full-duplex
Features	Full duplex capability, layer 3 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, auto-uplink (auto MDI/MDI-X), IGMP snooping, manageable, Redundant Power System connector
Power1	AC 120/230 V ( 50/60 Hz )
Ports Qty	24 x Ethernet 10Base-T, Ethernet 100Base-TX
General
Width	17.5 in
Depth	11.8 in
Height	1.7 in
Weight1	11.2 lbs
Networking
Connectivity Technology	Wired
Routing Protocol1	OSPF, IGRP, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, static IP routing, PIM-DM, IGMPv3
Switching Protocol	Ethernet
MAC Address Table Size	12K entries
Remote Management Protocol1	SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c
Status Indicators	Port status, port transmission speed, port duplex mode, system
Max Transfer Rate	100 Mbps
Expansion Connectivity
Expansion Slots Total (Free) 1	2 ( 2 ) x SFP (mini-GBIC)
Interfaces 1	24 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Interfaces 2	1 x management - RJ-45
Miscellaneous
Authentication Method	Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
MTBF	224,100 hour(s)
Compliant Standards1	CE, FCC Class A certified, UL, TUV GS, cUL, EN 60950, NOM, VCCI Class A ITE, IEC 60950, EN55022 Class A, UL 60950 Third Edition, CB, AS/NZ 3548 Class A
Power
Power Device	Power supply - internal
Voltage Required	AC 120/230 V ( 50/60 Hz )
Power Provided	485 Watt
Power Over Ethernet (PoE)	Yes
Software / System Requirements
Software Inculded	Enhanced Multilayer Software Image (EMI)
Environmental Parameters
Minimum Operating Temperature	32 �F
Maximum Operating Temperature	113 �F
Humidity Range Operating	10 - 85%

The Cisco Catalyst 3560 Series switches is a line of fixed configuration, enterprise-class, IEEE 802.3af and Cisco prestandard Power over Ethernet (PoE) switches in Fast Ethernet configurations that provide availability, security, and quality of service (QoS) to enhance network operations. The Catalyst 3560 is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced QoS, rate limiting, access control lists, multicast management, and high-performance IP routing - while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst 3560 is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks and intelligent network services. The Catalyst 3560 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones and Cisco Aironet wireless LAN access points, as well as any IEEE 802.3af-compliant end device. Power over Ethernet removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling that would otherwise be necessary in IP phone and wireless LAN deployments. Maximum power availability for a converged voice and data network is attainable when a Catalyst 3560 Switch is combined with the Cisco Redundant Power System 675 (RPS 675) for seamless protection against internal power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages

Cisco Catalyst 3560-24PS EMI - switch - 24 ports