MFG#: CISCO2811
click to enlarge

Cisco 2811 Integrated Services Router - router

$1,735.95
Add to Cart
  • Specifications
  • Description
  • Accessories
  • Warranties
Main Specifications
Product Description Cisco 2811 Integrated Services Router - router
Product Category Router
Device Type Router
Form Factor External - modular - 1U
Dimensions 17.2 in x 16.4 in x 1.8 in
Weight 14.1 lbs
RAM 256 MB (installed) / 768 MB (max) - DDR SDRAM
Flash Memory 64 MB (installed) / 256 MB (max)
Data Link Protocol Ethernet, Fast Ethernet
Network/Transport Protocol IPSec
Remote Management Protocol SNMP 3
Features Modular design, firewall protection, hardware encryption, VPN support, MPLS support, Quality of Service (QoS)
Compliant Standards IEEE 802.3af
Power1 AC 120/230 V ( 50/60 Hz )
General
Width 17.2 in
Depth 16.4 in
Height 1.8 in
Weight1 14.1 lbs
Networking
Connectivity Technology Wired
Remote Management Protocol1 SNMP 3
Status Indicators Link activity, power
Expansion Connectivity
Expansion Slots Total (Free) 1 4 ( 4 ) x HWIC
Expansion Slots Total (Free) 2 1 ( 1 ) x NME
Expansion Slots Total (Free) 3 2 ( 2 ) x AIM
Expansion Slots Total (Free) 4 2 ( 2 ) x PVDM - SIMM 80-pin
Expansion Slots Total (Free) 5 2 memory
Expansion Slots Total (Free) 6 1 CompactFlash Card
Interfaces 1 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Interfaces 2 2 x USB
Interfaces 3 1 x management - console - RJ-45
Interfaces 4 1 x serial - auxiliary - RJ-45
Miscellaneous
Encryption Algorithm DES, Triple DES, SSL 3.0, 128-bit AES, 192-bit AES, 256-bit AES
Authentication Method Secure Shell v.2 (SSH2)
Compliant Standards1 CISPR 22 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, AS/NZ 3548 Class A, JATE, FCC Part 15, ICES-003 Class A, CS-03, EN 61000-6-2
Power
Power Device Power supply - internal
Voltage Required AC 120/230 V ( 50/60 Hz )
Software / System Requirements
OS Provided Cisco IOS IP Base
Environmental Parameters
Minimum Operating Temperature 32 °F
Maximum Operating Temperature 104 °F
Humidity Range Operating 5 - 95%
The Cisco 2800 Series provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series. The Cisco 2800 Series features the ability to deliver multiple high-quality simultaneous services at wire speed up to multiple T1/E1/xDSL connections. The routers offer embedded encryption acceleration and on the motherboard voice digital-signal-processor (DSP) slots; intrusion prevention system (IPS) and firewall functions; optional integrated call processing and voice mail support; high-density interfaces for a wide range of connectivity requirements; and sufficient performance and slot density for future network expansion requirements and advanced applications.