Cisco WAN Interface Card fax / modem

Main Specifications
Product Description	Cisco WAN Interface Card fax / modem
Product Category	Fax / modem
Device Type	Fax / modem
Dimensions	2.7 in x 3.9 in x 0.7 in
Weight	2.4 oz
Enclosure Type	Plug-in module
Data Compression Protocol	MNP-5, ITU V.42bis
Error Correction Protocol	MNP-4, ITU V.42, MNP-2, MNP-3
Fax Compatibility	G3
General
Width	2.7 in
Depth	3.9 in
Height	0.7 in
Networking
Connectivity Technology	Wired
Max Transfer Rate	56 Kbps
56K Technology	K56Flex, V.90
Protocols & Specifications	Bell 103, ITU V.21, Bell 212A, ITU V.22, ITU V.22bis, ITU V.29, ITU V.32, ITU V.32bis, ITU V.34, ITU V.90, ITU V.17, ITU V.23, ITU V.27ter, k56Flex, ITU V.34bis, ITU V.33
Expansion Connectivity
Compatible Slots	1 x expansion slot
Interfaces 1	1 x modem - phone line - RJ-11 x 2
Environmental Parameters
Minimum Operating Temperature	32 °F
Maximum Operating Temperature	104 °F
Humidity Range Operating	10 - 85%

The WAN interface cards -1AM and -2AM (WIC-1AM and WIC-2AM) provide one or two internal V.90 analog modems. These WICs can be used for incoming or outgoing analog modem calls. The WIC-2AM features dual RJ-11 connectors, while the WIC-1AM uses one port for connection to a standard telephone line, and the other port to connect to a basic analog telephone for use when the modem is idle.